washing machine repair dubai

The following precautions help to reduce whole-body vibration exposure:

  1. Limit the use of a vibrating washing machine until it is fixed.
  2. Mechanically isolate the vibrating source or surface to reduce exposure.
  3. Ensure that equipment is well maintained to avoid excessive vibration.
  4. contact us we repair it.

If your washing machine makes a loud rumbling or repetitive banging sound, which is particularly bad on a spin cycle, then it is most likely due to loose or worn out drum bearings. Contact us we solve it.

Your washing machine needs to stand level and balanced on its feet to function properly. An unbalanced appliance will vibrate and shake during operation. Try rocking the appliance from side to side or back and forth. If it's rocking a lot, your flooring or appliance's feet may be uneven.

If the washing machine is not balanced, it may shake violently during the spin cycle, causing water to spill on the floor. Redistributing the load will usually solve this issue if the cause is due to too many clothes on one side of the unit.

Make sure that the hoses aren't loose or leaking out the connections. If the pump is leaking you'll need to replace it. Contact us we fix it.

A washer leaking from the bottom can cause significant damage to your home if it is not fixed quickly. In most cases, the leak will be caused by a loose or punctured drain hose, a fault with the drain pump, or a worn-out tub-to-pump hose.

Remove the hose from the drain. Fill a bucket with boiling water and a package of baking soda. Slowly pour the mixture down the drain with a funnel. Wait about 10 minutes. Pour water down the drain again to check whether water runs through properly.

The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. so you want to repair the drain hose problem of the washing machine then contact fix hub

Chat Us Now